Nick Devlin of Hubbard, Oregon, brought his tapered and tubed 1972 Blazer to the table. With a built 427ci small-block churning 39s through Dana 60s, will this year's mud pit be enough to bog down this challenger?
The mighty orange Chevy is all about function, as illustrated by a Warn 16.5Ti winch, which is ready for action. Barebones and built, Nick hopes his purpose-built Bow Tie will blaze ahead of the competition and prove once and for all that simplicity rules.
The front suspension of Nick's Blazer is minimal by design, utilizing tried-and-true leaf springs, in this case the 6-inch Skyjacker variety, and a beefy Dana 60 axle with a McNamara locker and 5.13:1 cogs. Fourteen-inch-travel Pro Comp shock absorbers soak up the boulders, while steering is accomplished through a Redneck Ram.
Bringing up the rear is a slick Eaton differential sporting a Detroit Locker with 5.13:1 Yukon gears. As simple as the front, the rear is also located by a set of 6-inch Skyjacker lift springs.
PRP seats highlight the stripped-down interior, which has Auto Meter gauges monitoring all of the vitals. There is nothing fancy about an interior made for the dirty work of off-pavement fun, but this cockpit gets the job done with only what is needed.
The real magic of Nick's Blazer can be found under the hood, where a blueprinted and balanced 427 resides. This torquer mill puts out an estimated 700 lb-ft and 650 hp. From the built TH400 trans and 2,200-rpm stall torque converter to the triple-stick transfer case, Nick has built a vehicle that can get the power to the ground over any terrain.
|Owner/city:||Nick Devlin/Hubbard, Oregon|
|Vehicle model:||1972 Chevrolet Blazer|
|What he does when not 'wheeling:||Ironworker|
|Engine/aspiration:||Chevy 427ci V-8/|
Speed Pro forged pistons, Comp Cams roller cam, Harland Sharp rockers, 750-cfm Speed Demon carb, Edelbrock RPM Air Gap manifold, H.E.I. distributor, MSD ignition
|Transmission:||GM TH400 with heavy-duty clutches, B&M 2,200-rpm stall torque converter|
|Transfer case:||Off Road Design Doubler with triple sticks|
|Suspension (f/r):||6-inch Skyjacker leaf springs, Pro Comp shocks/6-inch Skyjacker leaf springs, Pro Comp shocks|
|Axles (f/r):||Dana 60, McNamara locker/|
Eaton, Detroit Locker
|Wheels:||Eaton 15x10-inch steel with bead locks|
|Tires:||39x18-15 Super Swamper Boggers|