sema 2006 - auburn Gear - Photo 9081218

Back to Article

<strong>Auburn Gear</strong><br/>The Auburn ECTED (Electronically Controlled Traction Enhancing Differential) locker for Dana 44 axles, with its revolutionary traction technology, provides the user with a selectable limited-slip or locking differential.

0703 4wd 01 z +sema 2006+black diamond suspension

<strong>Suspension</strong><br/><strong>Superlift Suspension Systems Black Diamond Suspension</strong><br/>A new 3-inch suspension system is available for both two- and four-door models of the '07 Jeep Wrangler JK.

<strong>Superlift Suspension Systems Black Diamond Suspension</strong><br/>The Black Diamond X2 7-inch suspension lift system is designed for the Jeep Wrangler CJ-7, YJ, and TJ.

<strong>Skyjacker Suspensions</strong><br/>The 3-inch Performance Strut Kit for the '07 Toyota FJ Cruiser uses new, gas-charged front struts, rear Softride coil springs, and extended rear sway-bar links.

<strong>Skyjacker Suspensions</strong><br/>A 4-inch Jeep Wrangler JK lift that uses Softride coil springs, track-bar relocation brackets, a pitman arm, and heavy-duty control arms.

<strong>Daystar Products International</strong><br/>Daystar now has an easy-to-install 2-1/2-inch front and rear spacer lift kit for the '07 Toyota FJ Cruiser.

<strong>Daystar Products International</strong><br/>EVS (Enhanced Vehicle Suspension) foam shock bumpstops are available from Daystar to increase performance by softening the shocks' compression.

<strong>Cage Offroad</strong><br/>Cage Offroad has a 4-inch suspension lift system for the '97-'06 Jeep Wranglers. The kit uses progressive rate coil springs and nitrogen shocks to provide a supple ride and ample suspension travel.

<strong>Skyjacker Suspensions</strong><br/>The new RockLock sway bar from Skyjacker is designed for the Jeep TJ. It can be easily unlocked and relocked by twisting a hub, and it offers adjustable stiffness control.

<strong>Light Racing</strong><br/>The new 1.5-inch- or 3-inch-travel JounceShock can be used as a nitrogen-charged secondary shock. It is said to maximize the capacity and performance of your suspension.

<strong>Pilot Automotive</strong><br/>This extreme off-road light with a 75-pound-holding-power suction-cup mount can be applied to any metal surface.

<strong>Granger Plastics</strong><br/>The new Water-Mate dual-purpose tank for serious off-roading holds up to 60 gallons of water for drinking or for additional weight for traction.

<strong>Bull Dog Winch</strong><br/>This 9,500-pound chrome winch features a series-wound 5.5hp motor, a three-stage planetary geartrain, an autoload hold brake, a freespooling clutch, 100-foot HD wire rope, and a roller fairlead.

<strong>Warrior Products</strong><br/>The new bolt-on Traction Control System from Warrior Products uses a three-point ladder bar and "Y"-style shackle. It has two points of adjustment and uses polyurethane bushings.

<strong>Light Racing</strong><br/>Now available is the new front and rear JounceShock system for '05-and-later Toyota Tacomas. Includes everything needed for installation.

<strong>Energy Suspension</strong><br/>Energy Suspension has a new, complete polyurethane suspension bushing set for '01-'04 Toyota Tacoma 4WD trucks.

<strong>Trail Master Suspension</strong><br/>This is the new 6-inch (3+3) Trail Master suspension system for the '05-'06 Toyota Tacoma 2WD, TRD, and 4WD. The kit combines Trail Master's 3-inch suspension with a 3-inch Performance Accessories body lift.

<strong>Trail Master Suspension</strong><br/>The new SSVR and SSVX reservoir shocks from Trail Master are designed using the company's Speed Sensitive Valving (SSV) technology. Swivel and nonswivel hose options with piggyback clamp included.

<strong>Rancho Suspension</strong><br/>The new Rancho Rock Crawler suspension system for the '07 Jeep JK Wrangler uses a rear linkage design that eliminates the need to relocate the fuel tank.

<strong>Rancho Suspension</strong><br/>The all-new RS9000XL line of shock absorbers uses a massive 2.75-inch-diameter shock body.

<strong>Pro Comp Suspension Systems</strong><br/>These reservoir clamps are machined from 6061 billet aluminum and feature a finned design that helps dissipate heat transferred from the shock's remote reservoir.

<strong>Pro Comp Suspension Systems</strong><br/>The new 5.5-inch suspension system for the '07 Toyota FJ Cruiser uses MX2.75c coilover front shocks and MX6 rear shocks to provide excellent on- and off-road performance.

<strong>Armor</strong><br/><strong>Superlift Suspension Systems</strong><br/>The Superlift eXtreme Ring diff cover protector.

<strong>Rampage Products<strong><br/>The SRS (Sand, Rock, Street) front, side, and rear BodyGuard tubular products from Rampage are specifically designed to protect and complement the unique Toyota FJ design.

<strong>Manik</strong><br/>This new heavy-duty rockcrawler bumper system features welded one-piece construction using 2x0.120-inch-wall steel.

<strong>Rampage Products</strong><br/>These heavy-duty, front and rear lighted recovery bumpers from Rampage Products offer dual, recessed ground-level light mounts, tapered ends, and custom-welded shackles for 1-inch D-rings.

<strong>Flowmaster </strong><br/>A new bolt-on American Thunder performance exhaust system for the Toyota FJ Cruiser featuring the 50 Series SUV Performance muffler.

<strong>Sunpro</strong><br/>The new 3-3/8-inch version of the popular Sunpro Sport ST tachometer. The tachometer features a 10,000-rev scale and modern styling.

<strong>Billy Boat Performance Exhaust</strong><br/>A stainless steel, performance after-cat exhaust system for the Toyota FJ Cruiser that is dyno-proven to create 12 additional rear-wheel horsepower and offers a deep, throaty exhaust note.

<strong>Hedman</strong><br/>Hamburger's S-10 V-8 swap drag race small oil pan with windage screen, crank scraper, and trapdoors.

<strong>JBA Headers</strong><br/>Check out JBA's Cat4ward header and Performance Exhaust System for 4.0L Jeep Wranglers. The kit features stainless steel construction and delivers increases in horsepower and torque throughout the rpm range.

<strong>JBA Headers</strong><br/>Check out JBA's Cat4ward header and Performance Exhaust System for the '07 Toyota FJ Cruiser. The kit offers stainless steel construction and provides increases in horsepower and torque throughout the rpm range.

<strong>K&N Engineering</strong><br/>This new air-intake kit for the '07 Toyota FJ Cruiser V-6 engine uses aerodynamic tubing and a K&N open-element filter.

<strong>MagnaFlow Performance Exhaust</strong><br/>Here's a new stainless steel after-cat exhaust system for the Toyota FJ Cruiser. The kit features mandrel-bent tubing and straight-through, wide-open muffler design.

<strong>Billy Boat Performance Exhaust</strong><br/>Billy Boat introduces a T304 stainless steel performance after-cat exhaust system for the '07 Jeep Cherokee SRT8. The kit adds a dyno-proven 17 hp and deep muscle-car sound.

<strong>Airaid</strong><br/>The all-new Airaid Cool Air Intake System for the FJ Cruiser features Airaid's SynthaFlow technology for superior filtration.

<strong>Advance Adapters</strong><br/>This is a new adapter kit to install an Atlas II or four-speed transfer case into the Toyota FJ Cruiser.

<strong>Advance Adapters</strong><br/>This is a new adapter kit to retrofit the Jeep AX15 transmission in place of the light-duty Jeep AX5 transmission.

<strong>AmsOil</strong><br/>Amsoil Ea Absolute Efficiency oil filters are made with premium-grade full synthetic nanofiber media and are the highest-efficiency filters available for the auto and light truck market.

<strong>4x4 Accessories</strong><br/><strong>Extreme Outback Products</strong><br/>The new Extreme Outback recovery kit contains straps, shackles, a pulley block, chain, ratchet strap, gloves, and a tree-saver all in a ballistic nylon bag with all-metal buckles and a reflective red triangle for safety.

<strong>Extreme Outback Products</strong><br/>These mil-spec multichoice deflators offer six preset psi levels. Pressure ranges available are 2-4-6-8-10-12 psi and 10-12-14-16-18-20 psi.

<strong>Extreme Outback Products</strong><br/>ExtremeAire Magnum is a 1.5hp air compressor with a continuous-duty 12-volt motor. It offers 2.6 cfm at 100 psi, is totally sealed from dirt and water, and can be mounted in any position.

<strong>Wrangler Northwest Power Products</strong><br/>The 30-foot-long I-Light jumper cable indicates when a connection is good with a green light; red = bad. This kit includes two-gauge, multistrand cable, Lexan connectors, and battery adapters.

<strong>Oasis Manufacturing</strong><br/>The new XD4000 is a powerful onboard air compressor that has 100-percent duty cycle at 200 psi and 8 cfm at 100 psi.

<strong>Mile Marker</strong><br/>New Mile Marker SX 9.5 and SX 12 electric winches in 9,500- and 12,000-pound capacities feature free spooling, low amp draw, and a new interactive remote control.

<strong>Mile Marker </strong><br/>The new MX 9 and MX 6 are MOSFET-controlled electronic 9,000- and 6,000-pound winches, respectively.

<strong>Air-Zenith</strong><br/>The Air-Zenith 200 PSI Air Ride compressor is 200-psi, 100-percent duty, 2.95-cfm. It comes with a brushless cooling fan for better heat dispersion.

<strong>Warn Industries</strong><br/>The PowerPlant Dual Force Air Accessory Kit is an optional trail kit designed to maximize the capability of the Warn PowerPlant multipurpose tool.

<strong>Warn Industries</strong><br/>The PowerPlant Dual Force HP is a vehicle-mounted multitool featuring a premium high-performance air compressor and a 9,500- or 12,000-pound Warn winch in one convenient, durable unit.

<strong>Ramsey Winch</strong><br/>The all-new Patriot 9500 UT features a self-engaging clutch that reduces winching time and acts as an additional safety factor.

<strong>Pro Comp Suspension Systems</strong><br/>The HID Motorsport Series lights are high-intensity discharge lights that provide increased output and draw 60 percent less amperage per light than traditional HID lights.

<strong>Baja Designs</strong><br/>New in the Soltek product line is a 4-inch quick-adjust light in HID (integrated ballast) or halogen driving, spot or fog/dust beams. Its computer-designed reflector provides smooth light patterns with no hot spots.

<strong>Tires & Wheels</strong><br/><strong>American Expedition Vehicles</strong><br/>These new DOT-approved beadlock wheels are available from AEV to fit a variety of applications.

<strong>Centerline Wheels</strong><br/>Centerline introduces a new run-flat military tactical wheel for 4x4s and trucks.

<strong>Brakes</strong><br/><strong>Power Brake Service</strong><br/>Power Brake Service offers hydroboost and master cylinder kits to replace the stock brake vacuum booster. The system uses steering pump pressure to provide up to 2,000 psi assist to the brakes.

<strong>Pro Comp Tire & Wheel</strong><br/>The Xtreme M/T combines form and function and satisfies even the most demanding off-road enthusiast.

<strong>Axles</strong><br/><strong>Dynatrac</strong><br/>Dynatrac's Stub Hub Conversion for Dana 60 axles increases clearance by drawing the locking hub back inside the protection of the wheel by more than 1.5 inches per side. Up to 2.375 inches per side of clearance can be realized by combining the Stub Hub with the new DynaLoc locking hub.

<strong>Currie Enterprises</strong><br/>The Rock Jock high-pinion Dana 60 is built from nodular iron and the cover has been rotated 60 degrees for maximum ground clearance. It also features a flow-through oiling system and an oversize front pinion bearing.

<strong>9-Plus</strong><br/>The all-new 9-Plus CTF ("Cut-to-Fit") 31-spline axleshaft kits are boxed axle kits with extra-long splines designed to cut-to-fit. They include dual wheel patterns, stud sets, an HD bearing, and a retainer plate.

<strong>TJM </strong><br/>The new TJM Pro Locker is an air-operated locking differential that can be operated by the driver at the flick of a switch.

<strong>Auburn Gear</strong><br/>The Auburn ECTED (Electronically Controlled Traction Enhancing Differential) locker for Dana 44 axles, with its revolutionary traction technology, provides the user with a selectable limited-slip or locking differential.

<strong>Exterior</strong><br/><strong>Omix-Ada</strong><br/>All-new for 2007 are these heavy-duty, 7-inch, oversize fender flares for the Jeep CJ-7 and Wrangler.

<strong>Trick Flow Specialties</strong><br/>The company introduces its heavy-duty cast-aluminum differential cover with bearing cap support studs.

<strong>Schrader-Bridgeport</strong><br/>The new wireless kit installs TPMS on vehicles not equipped with OE systems. The kit includes a receiver, a monitor, and wheel transmitters and meets all TREAD Act requirements.

<strong>American Expedition Vehicles</strong><br/>The Brute Kit do-it-yourself conversion kit for the '97-'06 Jeep Wrangler TJ is now available from AEV Conversions. The kits are manufactured from 14-gauge stamped steel and allow a typical Jeep Wrangler to be converted to a pickup truck.