2009 Polaris Ranger Rzr S - twist Down Snap Lock - Photo 16459909

Back to Article

Once mounted to each of the four holes, you simply twist down the snap-lock and viola, the box is mounted. There is an extra hole drilled into each snap-lock to secure the box with your favorite lock for theft protection. The box can also be removed in seconds if you need full bed space.

The UMP intakes come with the mounting bracket pre-installed, a new breather tube and FRAM breather tube filter. Intake installs are relatively easy but please read through the instructions. There are a few drills and cuts that need to be made.

The removal of the stock intake is easy but time consuming. We removed the rear portion of the cage and the bed to expose the stock intake. The stock intake is mounted from above by this zinc colored L-bracket that needs to be removed.

We removed the black mounting bracket from the intake and used the provided new transmission bolts to mount it to the top of the transmission housing. The mounting bracket needs to be installed first.

The stock intake inlet box needs to be cut to allow clearance for the larger UMP intake tube. You will also need to cut a hole in the side of the box for the new breather filter. Once both holes are cut, the new goods slide into place perfectly. Remember, read through the provided instructions for correct size cuts and measurements.

After a few slight modifications the new intake mounted up quickly and easily. The tone coming from the unit is much improved over the factory intake. The new sound is noticeable but we would not say it is louder. Over the next month we have a few excursions planned for the RZR-S so look for an update to how our new UMP Intake is doing.

Trekking out into the wilderness usually means a thought-out planning process before hand. Carrying the proper gear, tools and spare parts can be a lifesaver. Polaris offers a really nice bolt-in Lock & Ride Cargo Box unit that will carry everything you need in the bed of your RZR or RZR-S. Even better, the install took us all of 5 minutes. The box slides into place over factory holes already located in your bed space and mounts with four of these handy snap-locks.

Once mounted to each of the four holes, you simply twist down the snap-lock and viola, the box is mounted. There is an extra hole drilled into each snap-lock to secure the box with your favorite lock for theft protection. The box can also be removed in seconds if you need full bed space.

The Cargo Box provides ample room for all of your gear and because it was made for this vehicle, you still have plenty of room on either side of your bed space. We have a spare fuel tank and cooler that will be mounted soon and featured in an upcoming article.

If you were wondering if the box was tough, check out one of our 200-pound-plus friends standing on it. The cargo box didn't even flex. This easy modification is a must-have for all Polaris RZR and RZR-S owners if you ask us.