• JP Magazine
  • Dirt Sports + Off-Road
  • 4-Wheel & Off-Road
  • Four Wheeler
  • Get A Print Subscription
  • Get A Digital Subscription
  • Gift Subscriptions
  • Subscriber Services
  • Back Issues
  • Personalized Covers

2006 Jeep Wrangler Tj Unlimited - wiring Harness - Photo 31472538

Back to Article
Share this
  • Over 150 hours were spent building the wiring harness alone.
Over 150 hours were spent building the wiring harness alone.
1002 4wd 01+2006 jeep wrangler tj unlimited+right front angle The 2.8L CRD engine is a perfect fit. The look is factory in appearance. The layout of the engine bay is clean and meticulous. The Liberty's steering column and gauge cluster were both transferred to the Unlimited. A JK Dana 30 front axle was installed to make use of the ABS wheel sensors. The rear Dana 44 axle came out of a 2008 Jeep Wrangler JK. The Rock-Trac transfer case from the original TJ Rubicon Unlimited was reinstalled. 1002 4wd 11+2006 jeep wrangler tj unlimited+left front angle Mating the Liberty diesel's wiring with the Unlimited's is a daunting task.
Over 150 hours were spent building the wiring harness alone. The motor mounts were custom-built using 1/4-inch plate. A red top Optima battery and K&N filter were both installed in the diesel. Even the Liberty cooling module was reinstalled. A set of 35-inch Dick Cepek Mud Country tires were mounted on a set of new Dick Cepek Torque wheels. 1002 4wd 15+2006 jeep wrangler tj unlimited+right rear angle
Back to Article
< 1 - 9 of >

Related Galleries

Connect With Us

Newsletter Sign Up

Subscribe to the Magazine

Sponsored Links