Subscribe to a magazine

Full Kibbetech Front End

Back to article View Gallery
2 of 13
A full KibbeTech frontend sits 5 inches wider per side under the Glassworks fiberglass fenders. The lower control arm is boxed 1/8-inch chromomly plate that uses 1-inch uniballs at the pivot point. The gold-anodized upper billet arm uses 3/4-inch FK rod ends. Together, combined with KibbeTech’s custom-built spindles that ride in between 1.5-inch uniballs, the front end is limited to 20 inches of travel with a pair of Beard limiting straps. Fox 2.5 10-inch-stroke shocks damp the ride while 2.5 Fox hydraulic bumpstops keep the truck from bottoming out.