Visible from the side are the custom nerf bars that are tied into the
frame. Faloni removed 3 inches from the rockers to improve ground clearance
before fabbing and installing the bars, which are made from 2x4-
inch, 0.250-inch-wall rectangular tubing. Out back is a custom rear bumper
made from 3x3-inch angle iron with a 4-inch fat plate welded to form
a triangle. The rear bumper has dual shackle mounts and a 2-inch hitch
receiver. Protecting the Scouts rear quarter panels is a custom exocage.
This ’cage is made from 1.250-inch-diameter, 0.120-inch-wall tubing and
the entire assembly is removable. Other mods include a 2-inch body lift
with stronger mounts, narrowed tail end (10 inches), LED taillights, and
three coats of Ice Silver paint covered by two layers of clearcoat.