Subscribe to a magazine

1966 International Scout 800 - Stout Scout Photos

Page 1 of 1
1 of 11
Visible from the side are the custom nerf bars that are tied into the frame. Faloni removed 3 inches from the rockers to improve ground clearance before fabbing and installing the bars, which are made from 2x4- inch, 0.250-inch-wall rectangular tubing. Out back is a custom rear bumper made from 3x3-inch angle iron with a 4-inch fat plate welded to form a triangle. The rear bumper has dual shackle mounts and a 2-inch hitch receiver. Protecting the Scouts rear quarter panels is a custom exocage. This ’cage is made from 1.250-inch-diameter, 0.120-inch-wall tubing and the entire assembly is removable. Other mods include a 2-inch body lift with stronger mounts, narrowed tail end (10 inches), LED taillights, and three coats of Ice Silver paint covered by two layers of clearcoat.
Back to article