Subscribe to a magazine

King Coilover

Back to article View Gallery
6 of 10
With all the other trickery going on, there’s no way the factory front suspension was staying put. This JD Fabrication system uses control arms that are 3.25 inches wider per side. The JD control arms connect to a custom JD steering knuckle (aka spindle) that’s much stronger than stock and was designed to fit a 2007 Tacoma unit-bearing hub. The JD knuckles provide a 3-inch front lift for improved ground clearance. King coilover and bypass shocks control the suspension as it cycles through 13 inches of wheel travel. A Fabtech bumpstop increases bottoming resistance during the biggest hits.