The exterior of the FJ60 was modified to enhance its function without destroying the classic bodywork. The rear fenders were radiused approximately 3 inches and the front fenders were radiused approximately 5 inches to allow the big 37-inch tires room to cycle without tire-to-body contact. An ARB roof rack was fitted with Baja Designs LED lighting on all sides so light could be projected in any direction. The rear bumper was made by JD Fab from 1/4-inch-thick steel plate and it has an integrated spare tire mount and internal storage. The rear bumper also extends under the rear fenders to help protect them from off-road damage. JD Fab also designed and built the rocker protection, which is made from 1/4-inch-thick steel plate and 2x2-inch rectangular tubing. Up front, the custom bumper serves as a mounting point for the Warn 16.5ti winch and Baja Designs lighting. The headlamps are modified Baja Designs units that feature H4 bulbs with hi- and low-beam capability.