If the rear suspension can’t keep up with the front suspension, you’re not going to have a good time, which is why a set of heavy-duty Alumi Craft trailing arms was constructed. These beautifully crafted links were outfitted with a set of Fox 4.5 six-tube, remote-reservoir 16-inch-stroke bypasses and 2.5 coilovers. With this combo, Alumi Craft was able to produce 18 inches of much needed travel. Hidden in the back of this photo is an Albins AGB transaxle, which sends power to the stout ProAm 30 Series CVs and hubs through ProAm 35-spline 300M axles. ProAm also completes the braking package with a set of six-piston calipers and 14-inch rotors.