Here is one of the pivot brackets for the Twin Traction Beam front end. This is a factory pivot bracket for a Ranger STX with the High-Rider option. The High Rider option was a factory-installed 1-1/2-inch lift. Using the High Rider pivot brackets will make it easier to produce more bump travel. The goal is for 20 inches of front suspension travel, 10 bump and 10 droop. This is a stout part, but since this truck will take a lot of abuse, the mounting holes and pivot holes were reinforced with weld washers. The beam pivot holes were reamed to a 5/8-inch size before the weld washers were installed.