Installation of Rough Country's TTB kit should be something you could do in your driveway with reasonable mechanical knowledge and some good jackstands. The first steps are to jack the vehicle up, properly secure it, and remove the tires, shocks, coils, and knock off the radius arm brackets. Ford sometimes bolted these on (if you are lucky), but most '80-to-'96 F-150s and Broncos came with these brackets riveted on. If you have rivets, removing them will be the most time-consuming part of the install as you try to grind, drill, or torch them out. Once the factory radius arm brackets are removed, you'll need to drill out the holes to a 7/16-inch size.