Subscribe to a magazine

Upgraded Heim Joints In Ttb Lift Kit

Back to article View Gallery
12 of 14
09. One complaint we’d always had with TTB (twin traction beam) lift kits was that the urethane (or rubber) bushings at the end of the radius arms would wear out quickly, causing a clunk during braking as the end bounced around in the bushing cavity. No such problems here—Camburg utilizes a 3/4-inch pivot bolt through a 1.25-inch rod end rather than using urethane. The Heim joints are inherently stronger and will last longer in this radius arm application