Subscribe to a magazine

129 0301 Jeep 17 Z

Back to article View Gallery
18 of 21
Install the rear air springs, place locknuts and washers on top of the upper stock spring mounts and tighten. Maneuver the rear axle with a floor jack to insert the lower air-spring studs through the new holes and install the lower nuts. Insert the air lines into the fittings on air springs, install the kit's Bilstein shock absorbers, tires and antiroll-bar links and lower the vehicle until the tires are sitting on the ground. Inflate the air springs to 45 psi before tightening the lower nuts.