Subscribe to a magazine

Roller Fairlead Install

Back to article View Gallery
3 of 10
Oops, we're already done with the install, and all we have for you is this roller fairlead install picture. Winch installs are easy and we were done in minutes, especially when all the bolts can be tightened with just a 9/16-inch box wrench like on this 9500UT. Four bolts hold the winch onto the bumper (standard 10.0x4.5-inch winch bolt pattern) and two bolts hold on the new roller fairlead included with the Ramsey winch. All the electronics are incorporated into the built-in bridge, so you have only two four-gauge cables (black-negative, red-positive) to run to the battery, save for the wireless remote receiver which needs a single ground wire attached.