Subscribe to a magazine

Steering Installed

Back to article View Gallery
9 of 9
Once installed you can set the steering wheel center and toe-in and crank down on the jam nuts on the regular tube inserts. Fine adjustments can be made with the super slick Synergy Double Adjuster by loosening the grade-8 pinch bolt and by tightening or loosening the large double adjuster nut. This is comically easy and easy to fine tune. The Double Adjusters tube adapters use the left-hand thread tie-rod ends so the large adjuster nut spins normally and intuitively “righty tighty lefty loosy.” Then tighten the pinch bolt to keep the adjuster from moving while you drive or wheel.