Now it was time to drape the Bestop Supertop NX across the top of the Jeep and the support bars we had already installed. This allowed us to fold back the side bows to expose the header’s underside and attach the leading edge of the Supertop to the header. The top’s fabric was attached to the header using the nine #8x1/2-inch pan head washer screws (beginning with the center, and alternating sides as we worked our way outward). A #8 oval head screw was used on each corner of the leading edge of the top fabric to secure it to the header. This was easiest done standing up in the front seats of the Jeep, and when done, we folded the side bows forward and again rested the header on the top of the windshield frame.