While the heads were at the machine shop our fingers did the walking through the Comp Cams catalog and we ordered up a complete valvetrain kit (PN K63-235-4) and a set of pushrods. The complete kit includes a cam, lifters, timing chain set, valvesprings, and valve stem seals all in one package. We went with the mid-level 260H cam with 110 degrees of lobe separation, 212 degrees of duration, 0.454-inch intake and exhaust valve lift. Now some might look at this cam and think we are over-camming it, but we’ve got no overdrive in the Jeep and are always in 4-Lo off-road anyway. Comp claims a near smooth idle which is exactly what we’ve come to expect from our little Dauntless powerhouse.