Click for Coverage
  • JP Magazine
  • Dirt Sports + Off-Road
  • 4-Wheel & Off-Road
  • Four Wheeler
X

Gear Box June 2013

Posted in How To on June 1, 2013
Share this

Edge Dodge Cummins Evolution CS/CTS Now available for 2003-’12 Dodge Rams with the 5.9L or 6.7L Cummins diesel, the Evolution CS/CTS is said to combine best-in-class tuning and features into a single device. It also comes loaded with options, allowing for adjustment of the rev limiter, speed limiter, rail pressure, injection timing, torque management and other parameters. Enhanced power and monitoring capabilities ensure a safe driving experience that exceeds expectations.
Edge Products (888) 360-3343 www.edgeproducts.com

Cummins Evolution CS CTS 300x219 Photo 68809314 Current Evolution CS/CTS owners can load the latest programming at no additional cost

MaxTrac Toyota Tundra Spindles The new MaxTrac front spindles for 2007-’13 Toyota Tundras clear up to 33-inch tall tires with minor fenderwell modifications possible depending upon tire width and backspacing. Made from cast ductile-iron, the one-piece spindles maintain proper steering and alignment geometry while providing 3.5 inches of lift. DOT extended length brake lines are also included with the spindles.
MaxTrac Suspension (714) 630-0363 www.maxtracsuspension.com

Maxtrac Spindles 258x300 Photo 68809317 The MaxTrac Toyota Tundra spindles are e-coated to prevent rust.

Fox Racing Shox 2.5 Factory Series Internal Bypass Jeep JK Shocks Made for Jeep JKs with 2.5-4 inch lifts, the new 2.5 Factory Series internal bypass shocks from Fox allow for the same position-sensitive technology utilized in their Trophy-Truck shocks. The internal bypass design contains passages that allow fluid to bypass the piston through ports as it cycles. The result is maximum control in the rough for your JK.
Fox Racing Shox (619) 768-1800 www.ridefox.com

FOX Shox 223x300 Photo 68809320 The Fox Factory Series internal bypass shocks maximize performance throughout the entire range of wheel travel.

Icon Vehicle Dynamics Toyota S2 Modular Shock System Designed to significantly enhance the off-road drivability of the 2005-and-up Toyota Tacoma, 2003-and-up 4Runner and 2007-and-up FJ Cruiser, the S2 system adds a secondary shock to an existing Icon coilover setup. The modular system utilizes the factory lower control arm and maintains the OE track width while providing excellent suspension damping capabilities. A bolt-on system, it eliminates the need for any major alterations to the frame or any other factory suspension components.
Icon Vehicle Dynamics (951) 689-1016 www.iconvehicledynamics.com

Icon Modular Shock System 300x225 Photo 68809323 The Icon S2 Modular Shock System significantly improves suspension performance at a fraction of the cost of a long-travel system.

Earl’s Performance Plumbing Oil Cooler Bracket System Keeping engine oil temperatures in check is a must for a race or play car and Earl’s is well known for offering a variety of coolers. Now, they make a trio of oil cooler clamps to make mounting easy as well. The anodized aluminum mounting system is E-coated with rubber isolators to mount the coolers rigidly.
Earl’s Performance Plumbing www.holley.com

Earls Performance Oil Cooler 300x215 Photo 68809326 The black anodized aluminum mounts fit all rows and heights of Earl’s coolers.

PhotosView Slideshow

Connect With Us

Newsletter Sign Up

Subscribe to the Magazine

Browse Articles By Vehicle

See Results