Subscribe to a magazine

New Billet Arm

Back to article View Gallery
10 of 24
We then installed the new billet upper control arm with the long side facing the front of the truck, and the four bolt holes for the uniball cover facing up. You may need to push the lower control arm down until you seat the Icon misalignment spacer into the lower uniball on the upper control arm. Next, seat the small upper space cap into the uniball and torque to 50 ft-lb using red Loctite. When installing the new billet arm, make sure to run the Heim spacers with the short side inboard on the pivot points.

Advertisement