Subscribe to a magazine

Jeep Wrangler Suspension & Steering Upgrade - Front Foibles Photos

Page 1 of 2
1 of 13
It all started with the track bar. We had a HD Currie Enterprises track bar in the Jeep which features a Johnny Joint at the frame end and aside from some minor drilling is a direct bolt-on. However, when wheeling the Rubicon Trail, someone noticed that the axle end of the track bar was hitting the axle-side bracket and had been doing so for long enough to both bend the bracket and wear a groove into the track bar. Once we got it home, we noticed that the hole in the frame-side mount was hogged out as well.
Back to article

Advertisement