Subscribe to a magazine

Transmission Input Seal

Back to article View Gallery
11 of 12
There were two parts we didn’t think of before we started this job. One was a new element for the B&M auxiliary filter, which we were able to get from the parts store. The other was the input seal on the transmission. Unfortunately, the parts store didn’t have it in stock and since we needed the Jeep on the road that day, we couldn’t wait. Garcia inspected our existing seal and it was still soft, the spring was still in it, and there were no cracks in the rubber. So, we lucked out and were able to re-use the old seal. Do yourself a favor, though—pick up this seal and whatever filter or filters you will need before you start.