One of the parts we didn’t have on the shelf and couldn’t come up with in a junkyard was the Ford knuckles. Fortunately for us, Reid Racing offers these high-quality knuckles. They are cast and machined for high-steer arms. We’re not using high-steer arms at this time, so we used some 9⁄16-inch, fine-thread bolts and anti-seize to seal the holes. The cast-in steering arms accept 1-ton tie-rod ends. The knuckles also feature cast-in steering stops: two for each knuckle, whether turning right or left to keep the axleshafts from binding.