Click for Coverage
  • JP Magazine
  • Dirt Sports + Off-Road
  • 4-Wheel & Off-Road
  • Four Wheeler
Subscribe to the Free
Newsletter
X

Adjustable Panhard/Track bar Axle Mount

Posted in News on May 22, 2013
Share this

Ballistic Fabrication has introduced an adjustable Panhard/track bar axle mount bracket. The new bracket has 5", 6", 7" separations from center of axle tube. Works with 2.5, 2.75, 3.0, 3.125, 3.25, 3.5, 4.0 axle tube sizes. 1.75 mounting width with 3/4" Hole. CNC cut on one of their two in house lasers from 1/4" mild steel and CNC bent on their 5-axis Trumph press brake. Comes unassembeled and requires welding. Designed with relief cuts to not trap mud and debris in the bracket. Bracket can be ground to fit for angular offsets. Setup for 3/4" rod ends with standard spacers or 3/4-7/8" rod ends with standard spacers. Will work for right hand or left hand track bar applications. Custom sizes are also available, however, your order must be phoned in. http://www.ballisticfabrication.com/Adjustable-PanhardTracbar-Axle-Mount_p_1953.html  

PhotosView Slideshow

Connect With Us

Newsletter Sign Up

Subscribe to the Magazine

Browse Articles By Vehicle

See Results