Click for Coverage
Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
  • JP Magazine
  • Dirt Sports + Off-Road
  • 4-Wheel & Off-Road
  • Four Wheeler

What We're Up To

Posted in News on July 17, 2013
Share this

Over the past few months we've been testing the PW10000 winch/pressure washer from ENGO USA. Yep, that's right, this unit combines a 10,000-pound capacity winch and a 1,600psi pressure washer into one unit. The pressure washer can draw water from either a pressurized water source or a standing water source. In this photo you can see how we have the PW10000 mounted on the rear of our vehicle and we're drawing water from a pond to wash our truck.     We mounted the PW10000 to a cradle, which we could then slide into our Ram's factory rear hitch receiver or a front hitch receiver that we added. We ran 12-volt power with connectors to both ends of the vehicle. This gives us the ability to winch or wash from either end of the truck. How was the install? How have we used it? How does it work?  The answer to these questions will be in the November 2013 issue of Four Wheeler, so stay tuned. In the meantime, for more information on the PW10000 and all of the ENGO USA winches, visit   

PhotosView Slideshow

Connect With Us

Newsletter Sign Up

Subscribe to the Magazine

Browse Articles By Vehicle

See Results