Back Country USA has been building off-road trailers for serious four-wheeling for more than 10 years. The company's newest trailer can even be built to match the wheels, paint, and taillights on your Wrangler TJ. For more information, contact: Back Country USA, Dept. 4WDSU, 27570 Sierra Hwy., Santa Clarita, CA 91351, (800) 558-5512, www.backcountrytrailers.com.
Intake Scoop For TJs
Truck Master Designs presents its Air Vent Intake Scoop for '98-and-newer Jeep Wrangler TJs. The functional intake increases airflow into the cab vents and is constructed of high-impact, ABS plastic that is easy to paint. The scoop is available in two finishes: smooth gray or textured black. For more information, contact: Truck Master Designs Inc., Dept. 4WDSU, 29189 C.R. 36, Wakarusa, IN 46573, (574) 862-4831, www.truckmasterdesigns.com.
Isuzu Ifs Air Locker
Owners of the Isuzu Trooper, Amigo, Rodeo, and VehiCROSS now have a new option for front-wheel traction: the ARB RD94 Air Locker. Designed specifically for the Isuzu IFS system, the locker accommodates the 17-spline axles that are commonly found on most late-model Isuzu 4WD vehicles. For more information, contact: ARB USA, Dept. 4WDSU, 20 S. Spokane St., Seattle, WA 98134, (206) 264-1669, www.arbusa.com.
Cherokee Control Arms
Currie's Johnny Joint Control Arms are now available for the Jeep XJ and JeepSpeed Racers. The control arms allow as many as 30 degrees of articulation to reduce suspension bind and improve performance. They feature Johnny Joint rod ends with heat-treated balls and high-density urethane bushings with zerk fittings. For more information, contact: Currie Ent., Dept. 4WDSU, 1480 N. Tustin Ave., Anaheim, CA 92807, (714) 528-6957, www.currieenterprises.com.
Gear Shift Position Decoder
Dakota Digital's GSS-5000 gear shift position decoder is designed to be used with GM 4L60-E, 4L80-E, 4T60-E, and 4T80-E transmissions equipped with the factory gear position sensor. The GSS-5000 takes the four-wire transmission switch gear position signal and separates it into individual 12-volt outputs for use with most aftermarket gear position indicators. For more information, contact: Dakota Digital, Dept. 4WDSU, 3421 W. Hovland Ave., Sioux Falls, SD 57107, (800) 852-3228, www.dakotadigital.com.
Toyota High-Pinion Third Members
Randy's Ring & Pinion now offers Toyota 8-inch high-pinion centersections for both front and rear applications. These third members will fit any 8-inch Toyota axle and work great when extra clearance and suspension travel are necessary. For more information, contact: Randy's Ring & Pinion, Dept. 4WDSU, 11630 Airport Rd., Ste. 300, Everett, WA 98204, (800) 291-1360, www.ring-pinion.com.
The Tera NP231
Tera Manufacturing is now offering the Jeep NP231 transfer case as an assembled unit complete with the Tera 4:1 Low gears, the heavy-duty short shaft kit, a 2-Lo Low-range shifter, and a new rear case half. For more information, contact: Tera Mfg., Dept. 4WDSU, 8385 S. Allen St., Ste. 115, Sandy, UT 84070, (801) 256-9897, www.teraflx.com.
Give your headlights a little more off-road protection with X-Pel headlight film. It is easy to install and computer-designed for an exact fit. The film is UV-stabilized, scratch-resistant, and is guaranteed to prevent breakage from rocks as big as 1 inch in diameter, traveling at more than 120 mph. For more information, contact: 4x4 Connections Inc., Dept. 4WDSU, 11 Battery Dr., Winchester, VA 22601, (540) 450-0394, www.4x4connection.com.
Keep your food and drinks cold on the trail with a portable refrigerator from Fridge Freeze. Because it uses condenser coils and no fan, the 12-volt/110-volt fridge has a low amp draw, even in very hot conditions. The exterior is made of marine-grade, anodized aluminum, while 3 inches of polyurethane foam provide the insulation. The Fridge Freeze is available in 60.0L, 45.0L, and 35.0L models. For more information, contact: Fridge Freeze, Dept. 4WDSU, 5343 Banks St., San Diego, CA 92110, (619) 220-6003, www.fridgefreeze.com.
CJ Dash Knobs
If the old, plastic dash knobs on your CJ have deteriorated to the point where they are just falling off, Currie now has billet aluminum replacement knobs that slip right onto the stud and secure with a setscrew. For more information, contact: Currie Ent., Dept. 4WDSU, 1480 N. Tustin Ave., Anaheim, CA 92807, (714) 528-6957, www.currieenterprises.com.