Jeep Grand Cherokee Bumper - 4X ProductsPosted in Product Reviews on October 1, 2003 Comment (0)
Jeep Grand Cherokee Bumpers
Trailready announces its new line of extreme bumpers for the Jeep Grand Cherokee. This new guard system is available in both front and rear matching models that complement the original style while adding the aggressive approach and departure necessary for extreme four-wheeling. The direct bolt-on replacements for the OE fascia are CNC-fabricated from 0.125-inch steel with all frame-mounted brackets formed from 0.1875-inch steel plate. Standard color is powdercoated gloss black, but custom colors are available. Available features include dual shackle mounts, semi-concealed winch mounts, an integral receiver hitch, a swing-away tire carrier, a high-lift jack mount, and light ports. For more information, contact: Trailready, Dept. 4WDSU, 1304 80th St. SW, Everett, WA 98203, (425) 353-6776, www.trailready.com.
Toyota 3.0L and 3.4L V-6 Adjustable Cam Gears
D.O.A. Racing Engines has released its new Toyota 3.0L and 3.4L V-6 adjustable cam gears. The fully adjustable cam gears are CNC-machined, billet alloy timing gears, which allow you to advance and retard the settings for OEM camshafts, as well as the correct degreeing of D.O.A. performance camshafts. These cam gears are a must for fine-tuning performance. For more information, contact: D.O.A. Racing Engines, Dept. 4WDSU, 128 Milbros Ln., Mooresville, NC 28117, (704) 799-6261, www.doaracingengines.com.
Spidertrax SDW/Dana High Steer Arm
The Spidertrax SDW/Dana High Steer Arms are perfect for setting up crossover or high steer on Dana 44 flat-top knuckles. Every arm is set up with two link mount hole locations designed for a 5/8-inch bolt rod end. Unlike other high-steer kits that use 9/16-inch hardware, these arms mount to the flat-top knuckle using the Spidertrax 5/8-inch stud kit. It's available for both passenger and driver sides. For more information, contact: Spidertrax Inc., Dept. 4WDSU, 11755-B N. 75th St., Longmont, CO 80503, (800) 286-0898, www.spidertrax.com.
TJ Suspension System
Converting your Jeep from a docile street ride to an aggressive off-road machine is now quick and affordable. Black Diamond offers an economical solution for taking your Jeep to the next level: a 3-inch suspension system for '97 to '01 TJ Wranglers. It offers maximum articulation for hard-core four-wheeling without compromising factory ride characteristics. The front and rear replacement coil springs provide 3 inches of lift while retaining the OEM spring rate and allowing the use of up to 33-inch tires. The kit includes front quick-disconnect antisway bar links, rear antisway bar links, a rear track bar extension bracket, and a transfer case lowering kit to ensure proper drivetrain geometry. Extended polyurethane bumpstops help prevent damage from tire-to-fender contact during maximum articulation. For more information, contact: Black Diamond, Dept. 4WDSU, 274 Huey Lenard Loop, West Monroe, LA 71291, (866) 680-6666, www.blackdiamondoffroad.com.
Remove your hardtop or soft top and enjoy the open air driving experience with Bestop accessories, which are now available for the '03 Jeep Wrangler, Bestop Bikini, Windjammer, and Duster. They feature genuine Haartz fabric and can perfectly color-match to original equipment colors. The Header Bikini attaches to the windshield with a special channel that requires no drilling and includes reinforced edges to prevent flapping. The Windjammer extends from the roll bar to the floor, and it features a large clear window for visibility and a roll-up doggie door for convenience. The Duster Deck Cover protects the rear seat from sun, rain, and dust, while improving gas mileage and keeping valuables out of sight. It fits with the factory soft top removed and includes snaps that attach it to the Windjammer. The Bikini, Windjammer, and Duster are available in black diamond and khaki diamond. For more information, contact: Bestop Inc., Dept. 4WDSU, 2100 W. Midway Blvd., Broomfield, CO 80020, (800) 845-3567, www.bestop.com.
Stop rust permanently! Magnet Paint now offers Chassis Saver. This low-odor, high-build, single-component chassis paint and underbody coating provides excellent rust and corrosion protection. It begins by chemically bonding to clean or rusty steel to form a rock-hard, yet flexible, non-porous, glaze-like finish that won't crack, chip, or peel. Chassis Saver works by isolating metal from moisture. Without moisture present, steel can't rust or corrode. It's actually strengthened by exposure to moisture and is not affected by salt, gasoline, diesel fuel, oils, battery acids, hydraulic fluids, solvents, chemicals, or corrosives. Chassis Saver can be applied with a brush, sprayed on, or rolled. For more information, contact: Magnet Paint & Shellac Co. Inc., Dept. 4WDSU, 336 Bayview Ave., Amityville, NY 11701, (800) 922-9981, www.magnetpaints.com.
Roll Bar Handles
EK Ekcessories, a leader in sport accessories since 1986, has launched its new motor sports division. The new EK Motor Sports division is introducing products geared toward Jeep-styled off-roading vehicles. For its new roll bar handles, EK used in-house materials to construct a well-made product. The strong hook and loop fastening system quickly attaches to most roll bars, and they are lined with a unique rubber pad that prevents slipping. The soft rubber grip is comfortable and won't sag when pulled. The 100-percent nylon webbing is available in 25 unique patterns and solid colors and are sold in pairs. For more information, contact: EK Ekcessories Inc., Dept. 4WDSU, 575 W. 3200 S., Logan, UT 84321, (435) 753-8448, www.ekusa.com.
Crane 60 Kingpin Knuckles are the newest addition to the line of abuser-friendly rockcrawling products by Crane High Clearance. The Crane 60 Knuckles are dimensionally interchangeable but substantially stronger than OEM. They are made from 8630 chrome-moly Alloy with a 105,000-psi tensile-strength rating. For more information, contact: Crane High Clearance Inc., (303) 651-7757, www.highclearance.com.