Tough Jeep Bumpers
Hanson is pleased to announce that it is stepping up its production of bumpers, which were formerly produced on a limited basis. The noted design will be available to the public and suppliers on a large scale. Hanson's original quality, craftsmanship, and reputation will remain important features of its front and rear Jeep bumpers and cargo racks/rockers.For more information, contact: Hanson, (831) 757-9779, www.hansonenterprise.com.
TJ Welder Tray
Kilby Enterprises now offers its new Welder Tray Mounting System. It mounts in the engine compartment of the Jeep TJ Wrangler on the passenger-side fender. Your Premier Power Welder will then be in an easy-to-reach and secure location. The tray can be used separately from the welder bracket to mount other accessories such as a compressor, toolbox, or possibly even an air tank. An aftermarket filter, such as one from K&N, will be needed. The tray will not work with the KE-1000 OBA kit.For more information, contact: Kilby, (888) 465-4529, www.kilbyenterprises.com.
Gas Tank Protection for Cherokee XJsThe new Rock Attack gas-tank skidplates are built from beefy 3/16-inch-thick 50,000-psi laser-cut steel that's stronger than mild steel. The Rock Attack mounts in the factory location, which provides the strongest foundation and is an easy bolt-on. The kit includes the Rock Attack skidplate, high-grade zinc-plated mounting hardware, an HD nut plate for driver-side mounting (all '97-and-newer XJ's have passenger-side mounting plates from the factory), and complete instructions. The skids are treated to a five-stage prewash/phosphate coating before being powdercoated and shipped.For more information, contact: (316) 776-9900, www.dpgoffroad.com.
Flex-a-lite has developed a new 16-inch shrouded S-blade electric fan to replace your stock belt-driven fan. The Black Magic X-Treme provides bolt-on horsepower, improved gas mileage, cooler A/C output, and extends the life of your water pump. The new fan moves 3,300 cfm, draws only 18 amps, and dissipates 50 percent more heat than other 16-inch fans found on the market. The new S-blade design provides better blade support for impact-resistance or water crossings, and the shroud is made of glass-reinforced nylon. The entire unit measures 21-1/2x17-1/2x4-3/16 inches.For more information, contact: Flex-a-lite, (800) 851-1510, www.flex-a-lite.com.
Stainless-Steel Jeep Bumpers
Stout Products now offers tough, durable front and rear protection for your Jeep. The bumpers are fabricated from 304 stainless steel. Every product Stout offers is laser-cut, TIG-welded, and very strong. The Stout front bumper is made from -inch-thick 304 stainless-steel plate. It wraps closely around the frame to optimize your approach angle and has two 5/8-inch-thick tow points. A -inch-thick stainless-steel winch mount is also available. Both use factory mounting locations in the frame. The Stout rear bumper is made from 3/16-inch-thick stainless steel and features a 2-inch receiver. It has boxed ends and internal gussets for increased strength. Stout also produces a stainless-steel tire carrier, which bolts to the company's rear bumper and will hold a 36-inch tire.For more information, contact: Stout Products, (410) 374-9994, www.stoutproducts.com.
JNP Door Dolly
Here's a great way to carry and protect your Jeep doors after removing them - the Jeep door storage solution from Kusber Enterprises. The tough 16-gauge-steel construction is finished with a durable black powdercoating. Save your back from carrying heavy doors. Load doors and roll them for storage. The flip-up lifting handle saves space and your knees. Protect your expensive doors from abrasion and abuse. Dust cover available. All patents pending.For more information, contact: Kusbar Enterprises, (650) 826-0819, www.jnpproducts.com.