Subscribe to a magazine

March 2008 Off-Road Hardware - New Products

Bully Dog Downloaders
Jordan May | Writer
Posted March 1, 2008


-Provides additional performance, fuel economy, and safety
-Tow mode settings for optimal towing performance
-Extreme mode for high-end performance
-Diagnostic trouble-code reader
-Easy adjustment of factory speedometer for larger aftermarket wheels

For more information, contact: Bully Dog, (208) 397-3200, www.bullydog.com.


-12 inches of wheel travel
-1-inch uniball-fabricated spindles
-4 inches of ground clearance added into spindle
-Added caster for better handling
-Fully adjustable ride height

For more information, contact: Camburg, (714) 848-8880, www.camburg.com.


-Based off Dana 44 hub technology and strength
-Mounts between identical 1.625-inch-id Timken bearings
-Heat-treated 4130 spindle snouts threaded both left and right
-Retains stock wheel-mount surface to utilize stock rotor and caliper
-Works with stock and aftermarket case and fabricated spindles

For more information, contact: Blitzkrieg Motorsports, (714) 630-0630, www.blitzkriegoffroad.com.


-Clearance for 35-inch-tall tires
-2.75-inch-diameter coilover front shocks
-Stage I and Stage II available
-Rack-and-pinion stays in factory location
-New rear coils and new upper control arms
-Pro Comp Suspensions ES9000 rear shocks

For more information, contact: Pro Comp Suspensions, (800) 776-0767, www.explorerprocomp.com.


-Includes all fuel line parts
-Available with or without the inline-fuel pressure gauge
-Fittings and plugs to convert factory 3/8-inch line to -6AN lines
-1.5-inch-diameter, midnight-silver-encased, 0-100-psi liquid-filled gauge
-Fuel rails must be purchased separately

For more information, contact: Fuel Air Spark Technology, (877) 334-8355, www.fuelairspark.com.


-Massive 28-inch-round and 9-inch-tall filter
-1,350 cfm of flow
-Uses AEM Dryflow synthetic filter system tested at 99.4-percent cumulative efficiency
-Oil-free filter system
-Dryflow media will never degrade with repeated servicing
-Will not void your factory warranty

For more information, contact: Advanced Engine Management, (310) 484-2322, www.aempower.com.


-Provides 2-1/2 inches of lift
-New upper strut mounts and top spacer
-Optional 1-inch block and U-bolt kit
-New 5500-series rear shocks
-BDS Suspension exclusive No Fine Print warranty

For more information, contact: BDS Suspension, (517) 279-2135, www.bds-suspension.com.


-'03-or-newer Dodge Ram 2500/3500 series trucks
-8-10 inches of lift
-Retains your truck's stock steering feel and capability
-Safe handling and maximum enjoyment
-Pitman arm comes standard with lift kits or stand-alone product
-Easy installation

For more information, contact: Kelderman Mfg., (800) 334-6150, www.keldermanairride.com.


-Full long-arm four-link conversion
-Lower arms made of 2-1/2-inch-od, 1/4-inch-wall tubing
-2-1/2-inch coilover front shocks for great on- and off-road performance
-Desert Race System uses EXS trailing arms
-Eliminates axlewrap issues with stock leaf springs
-All control arms and hard parts feature exclusive abuse-proof lifetime guarantee

For more information, contact: Pure-Performance, (518) 270-9822, www.pure-performance.biz.

Comments

Advertisement