Subscribe to a magazine

Off-Road Hardware - New Products - September 2010

Blitzkrieg Hub
Kevin Blumer | Writer
Posted September 1, 2010

Off-Road Harrdware

Aeromotive Stackable Fuel Pressure Regulators
If you're making big power with a carbureted engine, Aeromotive's stackable fuel pressure regulators let you control multiple fuel pressures used with a single fuel pump. Bolt together as many as you need.
•Clean, slick alternative to cobbled-together "fuel logs"
•Billet aluminum, CNC-machined, and adjustable from 5 to 12 psi
For more information, contact:
Aeromotive, Inc.
(913) 647-7300

Blitzkrieg Motorsports 2-inch Race Hubs
If you wanted a pair of Blitzkrieg's 2.5-inch race hubs but needed a more affordable alternative, the new Blitzkrieg Motorsports 2-inch race hubs are for you. Each hub kit comes with a hub, bearings, seals, snout, snout locknut, and rotor adapter. This is a great system around which to build a midsize or fullsize prerunner front end. The snout is also available in a Chevy three-bolt style, letting GM owners upgrade from their stock unit bearing hubs.
•Hub is machined from 6061 aluminum, providing cost savings vs. 7075 aluminum
•Replacement bearings and races are less expensive with the 2-inch race hubs compared to the 2.5-inch hubs.
For more information, contact:
Blitzkrieg Motorsports
(714) 630-2090

Racing Wheels
Method Wheels was created to give off-road racers a wheel made specifically for their motorsport. The MR301 is one of those wheels put through numerous field tests and finite examinations to figure out where to minimize weight and increase strength. They're available in 15- to 20-inch wheel sizes in matte black or diamond cut with a clear coat.
For more information, contact:
Method Race Wheels
(866) 779-8604

Edelbrock E-Force Supercharger
Looking for more oomph when you hit the skinny pedal in your '04-or-newer Ford F-150? Edelbrock's new E-Force Supercharger bumps up the output of the 5.4 Triton V-8 to 478 horsepower and 504 lb-ft of torque at the flywheel. An air-to-water intercooler increases performance, and the complete system runs quietly. Fifty-state street-legal status is pending.
•Made in the USA
•Self-contained oiling system has 100,000-mile service intervals
For more information, contact:
Edelbrock Corp.
(310) 781-2222

Tilt-A-Hitch makes almost any trailer a tilt trailer.
•Use Tilt-A-Hitch with your jack to create a tilt trailer
•Mounts to any 2-inch receiver and has an 8,000-pound rating
For more information, contact:
(618) 616-1790

RHS LS Aluminum Race Block
The GM LS-series engines are some of the most popular powerplants in the dirt. It's readily available, produces great power, and is reliable. At the same time, if you need to build a full-on race motor you'll find that the stock LS block has limitations, and that's where the Racing Head Service (RHS) LS block comes in.
•Built-in clearance for extra-long stroker engine connecting rods
•Different available deck heights and available cylinder liners let you tailor your RHS LS block to your specific engine building needs
For more information, contact:
Racing Head Service (RHS)
(877) 776-4323

Load More Read Full Article