The Latest Goodies For Your 4x4
The Fourtreks modular LED light mounts are a made from 6061 T6 billet aluminum and are designed to work with a variety of tubing diameters. The LED light mounts include LED light adapters, clamping rings, and stainless steel mounting hardware.
The Staun II Dual Internal Pneumatic Beadlock from Coyote Enterprises is an internal-beadlock system that divides the tire’s air chamber into two parts. The idea is that the Staun II will stay at a high-pressure of 55 psi to secure both inner beads to the wheel. Since the Staun II has its own separate valve stem, the design is said to allow you to safely deflate the tire into single digits, without fear of losing a bead. The internal-pneumatic beadlock is also said to serve as an added level of cushion and wheel protection after a hard landing or severe tire compression. The Staun II is available for 15-, 16-, and 17-inch wheel diameters.
Info: Coyote Enterprises
Rancho’s long-arm suspension system is designed for the ’07-’13 Jeep Wrangler JK. The 4-inch long-arm kit includes a front adjustable track bar, quick-disconnect sway bar endlinks, heavy-duty tubular-style front radius arms, and adjustable upper links. Other features include front and rear coil springs, bumpstop spacers and extended-length brake lines. On ’12-and-newer model years, Rancho’s crossover exhaust-pipe kit (RS72003) or a new front driveshaft will be required.
MTS Company’s plug-and-play gauge panel is crafted for the ’87-’90 and ’93-’95 Jeep Wrangler YJ. Each panel includes a fuel, temp, oil, and volt gauge pre-installed. Also included is a plug-in-ready wiring harness. Panels are available in black or tan.
Info: MTS Company
DynoMax performance exhaust has launched performance exhaust systems for the ’12 Jeep Wrangler and ’11-’12 Jeep Grand Cherokee powered by the 3.6L V-6. The systems include 2.5-inch stainless steel mandrel-bent pipe, Ultra Flo muffler, and a polished exhaust tip. The Ultra Flow muffler is said to be dyno-proven to support up to 2,000 SCFM and 2,000 horsepower.
The PIAA 570 Series 73⁄16-inch LED Driving Lamps are said to cast 75,000 candela of cobalt-blue (6000 Kelvin) illumination. Each driving light produces a 30-degree spread and is SAE/DOT-compliant. Inside of the lamp housing are two rearward-facing LED bulbs that reflect off of a finely-tuned reflector via PIAA’s advanced Reflector Facing Technology (RFT). The total draw for two lamps at 12 volts is said to be 3 amps. The 570 LED kits include two lamps, mounting brackets, and pre-terminated wiring harness with switch and relay.
Badlands Off-Road Adventure’s Winching Recovery Bandana contains helpful information to aid in a winch recovery. The Bandana is meant to compliment and work as a quick reminder for the Badlands Winching DVD. The Bandana layout follows a vehicle recovery plan with pathways to more detail. A unique section of the Bandana offers steps for a “winch-rigging check walk through” to help verify every element of the rigging before you commit to the pull.
Info: Badlands Off-Road Adventures
Viking Offroad’s GS-9 winch is a 9,000-pound self-recovery winch that’s equipped with a fully-sealed Albright solenoid. Each GS-9 is fitted with a unique TieBridge that’s designed to reduce weight, add rigidity, and increase room for the winch line. A 4.6hp motor and three-stage planetary gearset is used, along with a patented cone-brake structure that is said to allow for rapid heat dispersion. Five models of the GS-9 are currently available.
Info: Viking Offroad
Trail-Gear offers Side-by-Side and Back-to-Back Battery Boxes. The boxes are designed to be welded or bolted in-place using holes machined into the bottom of the boxes. Each Battery Box is CNC laser-cut and formed from 12-gauge steel. The Trail-Gear Battery Boxes are designed to work with any Optima Group 34/78 battery.
The Centerforce Dual-Friction series high-performance single-disc clutches are now available for ’05-’12 RAM 2500 and 3500 trucks fitted with the 5.9L and 6.7L turbodiesel engines and six-speed manual transmissions. The Dual-Friction kits include a pressure plate, disc, flywheel, alignment tool, hydraulic slave cylinder, pilot bearing, T.O.B., and hardware.