PSC Steering Column, STP, JK Sport Cage, and More!
PSC Steering Columns
The universal steering column kits from PSC Motorsports were created with custom buggy builders in mind. All of the steel and aluminum column kits are available in multiple lengths, with a hex or splined steering wheel disconnect, and can be fitted with PSC’s adjustable column mounting kit. Each unit is also fitted with Delrin bearings to handle harsh off-road environments.
Information: PSC Motorsports
Universal Light Bar
The Universal Sleekster 2-Tab light bar from Randy Ellis Design can be mounted anywhere you have two flat surfaces 26 inches apart. Each bar is comprised of CNC mandrel-bent 11⁄4x0.095-wall steel tubing, with CNC-cut and -formed brackets and light tabs. Included with the kit is all of the mounting hardware and backing plates, along with a satin black powdercoat finish.
Information: Randy Ellis Design
STP’s Multipurpose Motor Treatment acts as a fuel stabilizer, fuel additive, and oil additive for all types of engines. From lawnmowers to V-8 pickups, the treatment is designed to clean, protect, and help lubricate your engine’s internals. Currently available at AutoZone, Walmart, Pep Boys, and wherever other STP products are sold.
JK Sport Cage
The OR-Fab Sport Cage offers occupant protection for the ’07 to current Jeep Wrangler JK. Each cage is comprised of 13⁄4x0.120-wall tubing and is equipped with integrated grab handles. Fits both two- and four-door models and can be reinforced with OR-Fab’s optional floor mount kit. Currently offered in two black finishes and compatible with soft and hard tops. Rear bars for four-door models are sold separately.
HTP TIG Welder
HTP America’s Invertig 221AC/DC inverter welder provides 220 amps of welding power in an easy-to-transport 40-pound package. The 221 offers independent AC amperage adjustment and frequency tunes from 20 to 200 Hz for greater arc control. Along with a user-friendly stick welding feature, the 221 stores up to 64 separate welding programs. Air cooled, water cooled, and dual-voltage models are available.
Information: HTP America
Flowmaster is offering more growl for the ’98-’11 Ford Ranger 4.0L with its Cat-Back SOS (Single Out Side) DBX series exhaust. The 50-state legal bolt-on system is designed specifically for the extended cab/shortbed model Rangers. Each stainless steel kit is comprised of 21⁄2-inch mandrel-bent tubing and is backed by a limited lifetime warranty.
Information: Flowmaster Mufflers
Fuel Pressure Regulator
Fuelab’s electronic fuel pressure regulator uses a microprocessor to communicate with the Prodigy variable-speed pump. From an idle condition to fully open throttle, it generates a signal, sensing approximately 100 times each second. This allows the pump to respond instantly to fluctuating fuel demands and decrease current draw when in reduced speed mode.
Rock Krawler’s Ultimate Krawler system for the Jeep Wrangler YJ, TJ, and LJ is a suspension kit built with the DIY guy in mind. Each system comes with a three-piece belly pan, a weld-on axle truss, control arm mounts, long arms, and Monster Krawler Joints. Rock Krawler offers standard wheelbase systems as well as stretch versions (up to 108 inches).
Information: Rock Krawler
The 40x13.50R17 KOH Trail Grappler from Nitto Tire is an off-road–only race tire designed specifically for the grueling King of the Hammers race. The KOH Nitto is based off of the company’s standard Trail Grappler but fitted with unique sidewalls for increased puncture resistance. A softer tread compound is also part of the new mold and is said to be chip resistant and stable at high speeds, and to provide exceptional traction in the rocks.
Information: Nitto Tire USA, www.nittotire.com.
Greazerz gives your kids a chance to have the same coveralls as their dad. The poly/cotton overalls have a two-way zipper, button cuffs, and an adjustable elastic waistband so they can easily slip over ordinary clothes. They are available in gray, navy-blue, or pink and come with a custom embroidered nametag with your child’s name.
Information: Greazerz Garage Wear Inc.
Icon Vehicle Dynamics tubular upper control arms are engineered to strengthen and correct the suspension geometry on the ’07 to current Toyota Tundra. The 1026 DOM arms are fitted with CNC-machined uniballs that allow the front suspension to cycle without binding. The arm set works with both two- and four-wheel drive applications and will work with factory wheels. A 6061 billet aluminum version is also available.
Information: Icon Vehicle Dynamics