• JP Magazine
  • Dirt Sports + Off-Road
  • 4-Wheel & Off-Road
  • Four Wheeler

Parts Rack - April 2014

Posted in Product Reviews on March 6, 2014 Comment (0)
Share this
Parts Rack - April 2014

Carb Terminator
Holley Performance Products Terminator line of carburetor-replacement fuel-injection systems replaces your rig’s carburetor with an EFI throttle body. Fuel delivery is achieved through an annular-discharge ring and the ECU is self-tuning while you drive, so no laptop computer is needed. The 950cfm square-flange throttle body comes with 80 lb/hr fuel injectors, which are advertised to handle engines from 250 to 600hp. Also included are a pre-wired throttle body, main wiring harness, handheld tuner, ECU, and necessary sensors.
INFO: Holley Performance Products
www.holley.com

holley terminator carb

Alternating Flame
Flaming River’s Billet HD Amp high-output alternators are equipped with balanced low-mass rotors, which are designed to produce power at as low as 400 rpm. Flaming River also boast that the alternators can operate safely at shaft speeds of 20,000 rpm. Each unit uses twin rectifier plates with 12 press-fit diodes to achieve greater surface area and increase heat dissipation. Alternators are offered in a machined, polished, or black anodized finish and have a 3 year/36,000 mile warranty.
INFO: Flaming River
800/648-8022, www.flamingriver.com

flaming river alternator

More Country
The new Trail Country tire from Dick Cepek Tires & Wheels is an all-terrain radial built specifically with light trucks and SUVs in mind. The updated Trail Country supports a unique five-rib design, scalloped shoulder lugs, deep sidebiters, and a heavy helping of sipings to increase the tires performance on-road and off. A total of 26 sizes should be available by the time you read this.
INFO: Dick Cepek Tires & Wheels
330/928-9092, www.dickcepek.com

dick cepek trail country

Tacoma 3-Link
Trail-Gear’s 3-Link front suspension kits were developed to work with the ’95-’04 Toyota Tacoma. Included with each kit is a 1.25 x 0.250-inch DOM panhard bar, 2 x 0.250-inch DOM control-arm links, and 1.25-inch Creeper Joints. The Panhard bracket on the axle is 3⁄16-inch and all other brackets are 1⁄4-inch steel, formed and welded. Each kit was crafted to work with Trail-Gear’s Rock Assault axle and high-steer. Currently, three versions of the 3-link are offered, along with additional suspension and solid-axle conversion accessories.
INFO: Trail-Gear
877/4X4-TOYS, www.trail-gear.com

trailgear toyota tacoma 3 link

JK Liner
BedRug has launched its BedRug and BedTred interior liners for the ’07-’14 Jeep Wrangler and Wrangler Unlimited platforms. The BedRug is comprised entirely of polypropylene and provides carpet-like fibers which are intended to be non-abrasive. BedTred is meant to be more similar to a spray-in liner, and like the BedRug, is touted as waterproof, mold and mildew resistant, and said not to stain from oil or chemicals.
INFO: BedRug
800/462-8435, www.bedrug.com

bedrug jeep jk liner

Painless Wrap
Classic Braid from Painless Performance is a wire wrap that is built to look like an OEM harness. Made from fine-mesh materials, the wrap is laterally split and crafted to be abrasion resistant and retain its shape beyond 300 degrees F. Sizes include 3⁄16-, 5⁄16-, 3⁄8-, 1⁄2-inch diameters.
INFO: Painless Performance
800/423-9696, www.painlessperformance.com

painless wire wrap

GM PowerStep
The AMP Research PowerStep running boards are now available for the ’14 Chevy Silverado and GMC Sierra 1500 series trucks. Each retractable step features a 600-pound capacity, LED lighting, Teflon coating, extruded aluminum running board, and die-cast aluminum-alloy linkage. The PowerStep is designed to automatically deploy when the vehicle door opens and close when it shuts.
INFO: AMP Research
888/983-2204, www.amp-research.com

amp research powerstep

Related Articles

Comments

Connect With Us

Newsletter Sign Up

Subscribe to the Magazine

Sponsored Content