New from Rough Country are these trick X Series Billet upper control arms for '02-'05 Dodge 1500 trucks. These control arms are dual-shock upgradeable. Designed by 3D modeling and CNC-machined from solid billet aircraft grade 6061-T6 aluminum, the X Series control arms work from the stock height up to 6 inches of lift while using OEM hardware. Information: Rough Country, 800/222-7023, www.roughcountry.com
True Flow now offers this new intake system for the '06 Hummer H3. True Flow says the free-flowing foam filter element increases performance by just over 6 hp. The True Flow intake system replaces the restrictive factory plastic tube and resonator box with a powdercoated, seamless tube and nylon-reinforced silicone couplers, which are designed to work in conjunction with the factory airbox. These durable air filters are easily cleaned and have a limited lifetime warranty. Information: True Flow, 866/999-9098, www.trueflow.com
Powertank says its Monster valve stems give you three times the flow, which should translate into lightning-fast inflations. For 2005, the Monster Valves have a deflation collar that dumps air faster than a coreless schrader valve with a simple twist. These replacement valve stems deflate a 37-inch tire from 30 to 10 psi in 20 seconds flat. Information: Powertank, 209/334-0898, www.powertank.com
Performance Distributors claims its new Live Wires for the Dodge 5.7L Hemi V-8 provide optimal performance and improved durability. The 1/2-inch-diameter wires come with a heat-resistant sleeving said to withstand temperatures ranging from minus 76 to 1,400 degrees F. Heat shrink is applied between the boot and sleeving to keep moisture and trail crud away from the wire terminals. They're custom-fit for the engine, no assembly is required, and they're available in five colors including red, black, blue, yellow, and purple. Information: Performance Distributors, 901/396-5782, www.performancedistributors.com
Transfer Flow, a manufacturer of aftermarket and OEM fuel tank systems, has introduced 30- and 50-gallon toolbox and refueling tank combos. The units come pre-assembled with a 12-volt pump located inside the locking storage compartment. The fuel nozzle is mounted on the outside of the toolbox, and comes with an 8-foot hose. The storage compartment of the 30-gallon unit has about 4 1/2 cubic feet of space, while the 50-gallon unit has a storage area of about 8 cubic feet. The tanks are made from 14-gauge aluminized steel for superior rust resistance and strength, and are mounted inside the toolbox. The tanks are also baffled to reduce fuel sloshing. Information: Transfer Flow, 530/893-5209, www.transferflow.com
Advanced Flow Engineering introduces a new cold-air intake system for the '05 Chevrolet Colorado/GMC Canyon that results in claimed max gains of 5 hp and 6 lb-ft of torque for the 3.5L five-cylinder engine. The Magnum Force Stage 2 Cold Intake (PN 54-10342) includes a molded intake tube, powdercoated heat shield, and high-flow, washable/reusable conical air filter. Information: Advanced Flow Engineering, 951/493-7100, www.afefilters.com