Subscribe to a magazine

Domed Feet Shock Cylinder

Back to article View Gallery
9 of 15
8. With the mounts installed, the domed feet were screwed into each JounceShock shaft end using a 1/4-inch pin wrench, and then the cylinder end of each JounceShock was threaded into their respective mounts. The final step was to install the 1/4-20 set screw with a dab of medium-strength thread locker. Here you can see the completed passenger-side assembly. The front end is completed by tightening the torsion bars and reinstalling the shocks and tires.

Advertisement