Subscribe to a magazine

Rcv Axle Shafts Installed

Back to article View Gallery
18 of 28
The ProSteer ball joints can be seen here, along with the Nitro ā€œCā€ gussets, the RCV axleshafts, and Reid Racing steering knuckles. The direct-replacement Reid knuckles, in the signature orange powdercoat, raise the tie rod an inch higher, to put your steering closer to the axle centerline, increasing ground clearance. The 35-spline RCV CVs (about the strength of a 35-spline Dana 60 shaft) allow the four-wheel drive system to operate at extreme steering angles without binding.