Subscribe to a magazine

Front View Under

Back to article View Gallery
4 of 5
Tim used an F-600 bumper on the front of his F-350 after chopping 16 inches out of the middle. He also built a flip-down winch and fairlead cover onto the bumper that holds the front license plate to keep everything legal. Under that bumper sits a front Dana 60 with 35-spline axles and a Trac-Lok differential attached to Super Duty leaf springs that give about 6 inches of lift over the 36-inch Swampers. To help fit the Swampers, Tim radiused the corners of the front fenders.

Advertisement