Once we realized that the O.R.D. kit would not work for us, Fabworx built its signature dual-triangulated four-link. The company's four-link uses traditional upper triangulated links that meet above the rear axle pumpkin and attach to a bracketry housing that Forrest created. The lower links are a reverse-triangulated design that mount the lower links at the ends of the axletubes and come together at a front crossmember set in back of the transfer case and below the frame. In actuality, the crossmember that Fabworx makes for its design is so similar to the one supplied with the O.R.D. kit that we were able to use the O.R.D. one.