A Classic Cruiser with a Twist
The four-wheeling community is as good as it gets. No matter what age, vehicle, or type of wheeling you're into, most of your fellow four-wheel enthusiast will be eager to lend a hand or a spare part. Recently we got the opportunity to peel off out on a weeklong off-road trip with one such helpful wheeling enthusiast, Jason Redfield. Piloting his ultraclean '72 Toyota FJ-40, the Montana native helped lead our group through some of the most scenic and challenging trails just south of the Canadian border.
Since Jason knows the importance of working as a team off-road, he was always the first to offer help, and served as a virtual Swiss Army knife of 4x knowhow throughout the trip. And while Jason wasn't afraid to power up and air out his classic FJ, he managed to keep the well-built machine running clean for the entire journey.
Built with the help of the fabrication gurus at Advance Frame Works (now Throttle Down Kustoms), the retro-mod FJ-40 retains the classic lines of the '70s Toyota and is filled with neatly placed touches of modern performance. Though a quick glance at the Sunburst Orange paint job and cleanly laid tubing might make you think that this classic Cruiser is all show, we assure you this classic Cruiser is built for go!
1972 Toyota FJ-40 Land Cruiser
Engine: 6.0L V-8 from an '04 Chevy pickup, Howell wiring harness, Corvette exhaust manifolds
Transfer case: NP205
Axles: Dana 60s, ARB Air Lockers, 5.38 gears
Springs & Such: Custom 4 1/2-inch multilink by AFW, 2 1/2-inch King coilovers in front; 4 1/2-inch Rubicon Express TJ coils in the rear; Rancho shocks
Tires & Wheels: 37x12.50 BFG Krawlers on 17x9 Trail Ready beadlocks
Steering: Custom high steer with a PSC hydraulic-assist kit
Other Stuff: 1-inch body lift, 1 3/4-inch DOM tube cage and custom bumpers by AFW, 9,000-pound Warn winch, Master Craft seats