Subscribe to a magazine

Jeep Cj2a Rear Corner Tube

Back to article View Gallery
16 of 33
On the rear corners of CJ-2A tubs are small tubes; these are used for the factory soft top bows when the top is up. When the bows are stored, they fit into two sheetmetal pockets welded to the passenger side, one near the rear and one close to the driver's elbow on the outside of the body. On the CJ-2A, -3A, -3B, and DJ-3A, the tailgate has slotted hinges so it can be removed. Chains hold the gate closed and support it in the open position. Notice the externally mounted taillight on the driver side only, as only one was required.

Advertisement