15. Once that was sorted, we pulled the PSC ram out to half of its 8-inch travel and figured out where to put it on the axle with the tires centered. We put it up above the chromoly tie rod for protection from rocks. We used a few good tack welds to hold it on, and tape to protect the ports and the rod from welding slag. We only tacked it for the time being because we want to cycle the steering and suspension to make sure it cleared everything before burning it home. You can also see the notch in the frame for the drag link. With the passenger tire 24 inches up in the air, the drag link clears the top of the notch by almost 1-inch.