Subscribe to a magazine

Control Arm Mounts

Back to article View Gallery
1 of 12
On the front axle, we went with a set of Ballistic Fabrication Rockwell-specific radius-style control-arm mounts that come affixed with a flat-bottom coil plate. The coil plate comes with a spring retainer and is 5-1/2 inches wide to accommodate a coil from a Jeep Wrangler TJ. Each of the mounts are made of 1/4-inch laser-cut steel and fitted with a 7-inch gap between the 9⁄16-inch control-arm mounting holes.

Advertisement