Click for Coverage

Mockup Duramax Engine - Photo 53546435

Back to Article

Pela dropped off the mockup motor, axles, chassis, and intricate measurements so Ruegger could work his magic and build the drivetrain. Every component on a build like this truck needs to fit precisely and be as perfect as any race-car, winning sometimes is everything!

pela custom chassis buggy

Pela dropped off the mockup motor, axles, chassis, and intricate measurements so Ruegger could work his magic and build the drivetrain. Every component on a build like this truck needs to fit precisely and be as perfect as any race-car, winning sometimes is everything!

Pusher Intakes provided Adam with this badass green twin turbo intake kit for project Next Level. These powdercoated pipes will look great under the hood.

Now that the chassis design is complete, Dennis Ruegger and Adam Pela will get to work on mocking up the cage, suspension, and motor mounts. This chassis will have a wheelbase around 130 inches and is being built using 1 1/2-inch tubing.

Pela dropped off the mockup motor, axles, chassis, and intricate measurements so Ruegger could work his magic and build the drivetrain. Every component on a build like this truck needs to fit precisely and be as perfect as any race-car, winning sometimes is everything!

Plan B Fab is widely known for its amazing mega truck parts and as a competitor at the highest levels. Rob never backs down from a challenge, so he jumped at the opportunity to race side-by-side with one of the best diesel engine builders in the industry.

5-ton axles and 28L tires will fill the wheelwells of Plan B Fab’s ’12 diesel Dodge Ram. This is a rebuild of a previous mud truck. Rob says, “Weight will not be an issue!” Stay tuned for this pair of competitors, because this build-off will put all the other competitions to shame.

plan b fab wheels