Our Synergy front three-link came with the parts to build a track bar. We installed the control-arm mounts some time back in Part 2 (July ’14), but finally got around to assembling the track bar once we got the drag link and tie rod installed and the track bar mounts tacked in place. Our track bar matches the length of the drag link. We cut the supplied tube down to length and tacked the tube-inserts in place until we were were happy with the length. Also, we are going to do what we can to keep the track bar straight. Adding a bend would be relatively easy, but it also would make a weak point on the track bar where a bend could propagate. Remember that the angle of the track bar must match that of the drag link to avoid bump steer.