Cappa had previously wired up some auxiliary driving lights to an aftermarket panel in front of the shifter. However, the boot rubbed the panel, and the way the wiring was run through the firewall scared me in my capacity as chief fireman. So, I opted to add this sPOD control panel. Not only did I run the wiring for the lights in a cleaner fashion, but I also added a rear switched outlet to run 12V DC accessories in the back of the Jeep. Future plans include rock lights and ARB Air Lockers. The sPOD control box mounts under the hood and goes straight to the battery so there are no possible issues with interference with the JK’s CANBUS.