Subscribe to a magazine

Inner Knuckles

Back to article View Gallery
3 of 9
The Reid Racing Dana 30/Dana 44 conversion knuckles are super-burly parts that not only allow the use of earlier 5x5.5, 6x5.5, or 8x6.5 Dana 44 stub shafts, brakes, and spindles, but offer real strength improvement over the factory Dana 30 knuckles. And unlike any factory TJ, XJ, or YJ knuckle, the tops are machined flat, drilled, and tapped to run aftermarket three- or four-bolt high-steer arms. Reid also had the high-strength spindle studs, which we pressed in before installing the knuckles.