Subscribe to a magazine

Randys Master Rebuild Kit Ring And Pinion

Back to article View Gallery
2 of 11
To match the gear ratio of the Hazel-hand-me-down front Dana 30, I got a new 4.88 ring and pinion for the Dana 44 from Randy's Ring and Pinion. I used a junkyard carrier I had on my shelf and some leftover parts from a Randy's master rebuild kit and set the gears up myself. It's a good thing that I went with the 4.88's, because I decided to just run it as is for the derby. I did weld the spider gears, so I guess we'll see if a spool really can compete with 4WD.