Click for Coverage
  • JP Magazine
  • Dirt Sports + Off-Road
  • 4-Wheel & Off-Road
  • Four Wheeler
X

’69 Chevy

Posted in Project Vehicles on March 1, 2001
Share this
Click the filmstrip icon below for video! Click the filmstrip icon below for video!
p56431 large+1969 Chevrolet+Front Driver Side
p56432 large+1969 Chevrolet+Rear View
p56433 large+1969 Chevrolet+Interior
p56435 large+1969 Chevrolet+Engine
p56436 large+1969 Chevrolet+Front Passenger Side

We know it can be hard to drag yourself into work everyday. We understand that not everyone ’wheels for a living (you have our deepest sympathy), and when your 4x4 is your daily driver you often run the risk of calling in sick so you can spend the day in the mud, rocks, or sand.

Matt Dodd knows this all too well. He and his ’69 Chevy ½-ton fight the temptation to run the dunes seven days a week instead of showing up for work Monday through Friday. Dodd wasn’t afraid to slalom the truck through some of the softest sand we could find, because that’s what he built it for. Sandblasting power comes from a 350 fueled by a 650-cfm Holley on an Edelbrock intake. Mallory HEI ignition fires the spark plugs, and Doug’s headers draw the gases out through a single 3-inch Flowmaster exhaust.

Horsepower comes in at 300 more than your Craftsman air compressor. Inside the cab a Clarion CD player and original functional A/C work with a tilt wheel and a ’93 Chevy bench seat for modern cruising comfort.

Twin transmission coolers are now mounted behind the grille to take the heat from a swapped-in TH350 adapted to work with the stock NP205. Rancho 6-inch springs are used with Fox shocks to keep the suspension firm enough to limit wheelhop, but soft enough to keep Dodd’s one-year-old son asleep while strapped into his baby five-point harness.

Connect With Us

Newsletter Sign Up

Subscribe to the Magazine

Browse Articles By Vehicle

See Results