Subscribe to a magazine

Yoke Eliminator Kit

Back to article View Gallery
14 of 16
Due to the taller lift, we used the JB Conversions Heavy-Duty Slip Yoke Eliminator Kit. This provides an 18 percent larger output spline, will increase our transfer case’s strength by more than 50 percent, and will allow us to have a longer rear driveline. We also opted for the 4.00:1 low-range kit from 4 To 1 Manufacturing. This kit nearly doubles the stock 2.72:1 gears and is regarded as one of the best mods you can make for heavy-duty rockcrawling.

Advertisement