2001 Nissan Xterra - Project Xterra - Part IV
|
Remove the pinion yoke with a 1 1/16-inch socket. Save the shims on the pinion. These help set the preload rating. When installing the locker we used the OE bearings. If you use the same gears, make sure the height where the new ring gears sit matches the old carrier height. Since we were unable to pull the pinion race (a sleeve that fits between the pinion and the housing), the guys at Tri-County used a bearing spreader. View Related Article
|
|
Suzuki Grand Vitara Research
Review in-depth reviews on the new Suzuki Grand Vitara, featuring test drives, comparisons, options, features and more. Compare the Grand Vitara with other submodels and find all you need for your car buying needs. It has a comparable trade in value which should come in handy when you go to shop for your next car. You also might want to research the Hummer H2 and the Subaru Outback.
|
|